Experts point out that when the automatic mechanical watch of the original action agencies are to take these measures are to prevent the winding in the tight, the automatic mechanism is still on the formation of overload damage to mechanical parts. Spring to a certain degree of tightness on the skid, both to ensure that the winding should be the output torque, without prejudice to the ongoing work of the automatic body. In the absence of the hands of the body of the automatic watch, the watches screwdriver can be used into a large steel wheel screw screw monk, the rotation of the winding tight, such as still observation and feeling. How to diagnose automatic mechanical watch Common faults How to diagnose automatic mechanical replica watches Common faults In the renovation of automatic mechanical watch should first determine the fault is out of the automatic machine Experts point out that when the automatic mechanical watch of the original action agencies are to take these measures are to prevent the winding in the tight, the automatic mechanism is still on the formation of overload damage to mechanical parts. Spring to a certain degree of tightness on the skid, both to ensure that the winding should be the output torque, without prejudice to the ongoing work of the automatic body. In the absence of the hands of the institutions of the automatic watch, the uk replica watches can be used into the screwdriver screw into the large steel screw monk, the rotation of the winding tight, such as still observed and How to diagnose automatic mechanical watch common faults in the renovation of automatic mechanical watches should first determine whether the failure is for automatic mechanical watch before the body, or for automatic mechanical watch itself, especially the original mechanism and automatic structure. In the automatic rolex replica uk with the hands of the institutions, should first check by the hands of the original body of the work is normal, in the forward rotation of the handle in the process, if the pawl is observed in the large steel wheel teeth Bounce and feel the ring is tightening by circle, it means that the original motion is basically normal. When the winding was all tightened, although the spring in the box appear slippery also belong to the normal range, because the automatic watch winding is different from the general body watches winding, it is attached to the mainspring of a secondary hair , Some Vice-clockwork has a hook outside the box-wheel inner wall also has a circular monk, as shown above. Experts point out that when the automatic mechanical watch of the original action agencies are to take these measures are to prevent the winding in the tight, the automatic mechanism is still on the formation of overload damage to mechanical parts. Spring to tighten to a certain extent, slipping, both to ensure that the winding should be the output torque, without prejudice to the ongoing work of the automatic body. In the absence of the hands of the institutions of the automatic watch, the watches screwdriver can be used into the large steel wheel screw screw monk, the rotation of the winding tight, such as still observation and feeling. The above two cases, it indicates that the mechanical movement of the original watches is normal, otherwise it should first repair the body before the automatic agencies out of the fault, and then maintenance of automatic agencies. So as not to duplicate the automatic mechanism. Check whether the automatic mechanism is faulty. Can be rotated automatic hammer, if the automatic transmission mechanism more flexible, large pawl teeth in the pawl bounce on the teeth, then the automatic body is normal. If the automatic hammer in the rotation, the robot parts of the upper body attached to rotation, then the disengagement device out of the fault, when the hands of the article, the automatic hammer appears high-speed operation shows another release device [ Is out of the device) out of the problem.